HP (Hewlett-Packard) 1912NM ユーザーズマニュアル
Recognizing Preset Display Resolutions
The display resolutions listed below are the most commonly used modes and are set as factory
defaults. This monitor automatically recognizes these preset modes and they will appear properly
sized and centered on the screen.
defaults. This monitor automatically recognizes these preset modes and they will appear properly
sized and centered on the screen.
NOTE:
The preset modes can only be adjusted if the monitor is in PC mode. In Net mode, the
preset is locked at 1366 x 768 at 60Hz and cannot be adjusted.
1912nm and 1912nc Models (PC Mode)
Table 5-2
Factory Preset Modes
Preset
Pixel Format
Horz Freq (kHz)
Vert Freq (Hz)
1
640 × 480
31.47
59.94
2
720 × 400
31.47
70.09
3
800 × 600
37.88
60.32
4
1024 × 768
48.36
60.00
5
1280 × 720
45.0
60.0
6
1280 × 960
60.0
60.0
7
1280 × 1024
63.98
60.02
8
1366 × 768
47.71
59.79
Table 5-3
High Definition Video Formats
Preset
Timing Name
Pixel Format
Horz Freq (kHz)
Vert Freq (Hz)
1
480p
720 × 480
31.469
60
2
576p
720 × 576
31.25
50
3
720p50
1280 × 720
37.5
50
4
720p60
1280 × 720
45
60
Entering User Modes
The video controller signal may occasionally call for a mode that is not preset if:
●
You are not using a standard graphics adapter.
●
You are not using a preset mode.
It this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen
display. Your changes can be made to any or all of these modes and saved in memory. The monitor
automatically stores the new setting, then recognizes the new mode just as it does a preset mode. In
addition to the factory preset modes, there are at least 10 user modes that can be entered and
stored.
display. Your changes can be made to any or all of these modes and saved in memory. The monitor
automatically stores the new setting, then recognizes the new mode just as it does a preset mode. In
addition to the factory preset modes, there are at least 10 user modes that can be entered and
stored.
26
Chapter 5 Technical Specifications
ENWW