Casio MA0212-A プリント

1

MA0212-A

•

Button operations are indicated using the letters shown
in the illustration.

•

Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.

•

Press 

C

 to change from mode to mode.

•

In any mode, press 

B

 to illuminate the display.

•

In any mode, hold down 

C

 for about two seconds to return to the Timekeeping

Mode.

Press .

3. When the setting you want to change is flashing, press 

D

 to change it as

described below.

Seconds

Hour, Minutes, Year, Month, Day

Press 

D

 to reset to 

.

Press 

D

 to increase the setting.

•

Pressing 

D

 while the seconds are in the range of 30 to 59 resets them to 

 and

adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.

4. Press 

A

 to exit the setting screen.

•

The day of the week is automatically displayed in accordance with the date (year,
month, and day) settings.

•

The year can be set in the range of 2000 to 2099.

•

The watch’s built-in full automatic calendar automatically makes allowances for
different month lengths and leap years. Once you set the date, there should be no
reason to change it except after you have the watch’s battery replaced.

In the Timekeeping Mode, press 

D

 to toggle between 12-hour timekeeping and

24-hour timekeeping.

•

With the 12-hour format, the 

 (PM) indicator appears to the left of the hour digits for

times in the range of noon to 11:59 p.m. and no indicator appears to the left of the
hour digits for times in the range of midnight to 11:59 a.m.

•

With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.

•

The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.

Use the Timekeeping Mode to set and view the current
time and date.

1. In the Timekeeping Mode, hold down 

A

 until the

seconds start to flash, which indicates the setting
screen.

2. Press 

C

 to move the flashing in the sequence shown

below to select other settings.

Seconds

Hour

Minutes

Day

Month

Year

The multi-function alarm lets you specify the hour,
minutes, month, and day for the alarm. You can set up the
alarm so it sounds once when the alarm time is reached,
or for a snooze alarm that repeats up to seven times,
every five minutes.
You can also turn on an Hourly Time Signal that causes
the watch to beep twice every hour on the hour.

•

Pressing 

D

 in the Alarm Mode toggles between the

alarm screen (alarm time displayed) and the Hourly
Time Signal screen (

:00

 displayed).

•

An alarm setting (and an Hourly Time Signal setting) is
available in the Alarm Mode, which you enter by
pressing 

C

.

The alarm type is determined by the settings you make, as described below.

• Daily alarm

Set the hour and minutes for the alarm time. This type of setting causes the alarm to
sound everyday at the time you set.

• Date alarm

Set the month, day, hour and minutes for the alarm time. This type of setting causes
the alarm to sound at the specific time, on the specific date you set.

• 1-Month alarm

Set the month, hour and minutes for the alarm time. This type of setting causes the
alarm to sound everyday at time you set, only during the month you set.

• Monthly alarm

Set the day, hour and minutes for the alarm time. This type of setting causes the
alarm to sound every month at time you set, on the day you set.

1. In the Alarm Mode, press 

D

 to display the alarm

screen.

2. Hold down 

A

 until the hour setting of the alarm time

starts to flash, which indicates the setting screen.

•

This operation automatically turns on the single
alarm.

3. Press 

C

 to move the flashing in the sequence shown

below to select other settings.

Hour

Minutes

Month

Day

4. While a setting is flashing, press 

D

 to increase it.

•

To set an alarm that does not include a month (Daily alarm, Monthly alarm), set 

x

for the month. Press 

D

 until the 

x

 mark appears (between 12 and 1) while

month setting is flashing.

•

To set an alarm that does not include a day (Daily alarm, 1-Month alarm), set 

xx

for the day. Press 

D

 until the 

xx

 mark appears (between the end of the month

and 1) while the day setting is flashing.

•

When setting the alarm time using the 12-hour format, take care to set the time
correctly as a.m. (no indicator) or p.m. (

 indicator).

5. Press 

A

 to exit the setting screen.

The alarm tone sounds at the preset time for about 10 seconds. In the case of the
snooze alarm, the alarm repeats up to seven times every five minutes.

•

Pressing any button stops the alarm tone operation.

•

The alarm and the Hourly Time Signal sound in all modes.