Test-Um NT955 ユーザーズマニュアル

Test-Um NT955 Series
2.1. Battery Info

This screen indicates whether the unit is operating on Battery Power or

External Power and displays information that allows the user to monitor

the remaining charge status and aging of the battery.

(Figure 2.2 & Figure 2.3)

Charge Remaining: Displays the percentage of charge

remaining in percentages ranging from 0% to 100%. As the

battery discharges, the percentage of remaining charge is

reported in 10% steps.

Status: Reports the status of the charge cycle as Charging,

Normal (temperature in range), Charge Cycle Complete,

Automatic Shutdown Pending, Temperature Out of Range (too

high or too low to charge), Cannot Read Battery Status, or No

Battery.

Serial Number: Allows the user to identify a specific battery

Charge Cycles: Reports the number of times the battery

charger completes the charge cycle.

Remaining Maximum Capacity: An estimate of the ability of

the battery to store the charge.

Total Charge Accumulated: Tracks the amount of charge put

into the battery.

The Battery Info screen also includes a Reset Charge (RST CHRG) F1

soft key. The purpose of this function is to reset the charge cycle when

you change out the battery. You can also start a new charge cycle by

disconnecting the AC adapter momentarily.

The battery from the remote can be placed into the main unit and its

properties can be viewed.

Note: For additional power and battery information see the Battery

and Power Management section of this guide.

Validator

Properties

Validator

Properties