Toshiba B-419-GS10 ユーザーズマニュアル

EO1-33030 

2.4 Connecting the Power Cord

2- 3 

 

 

 

 

 

 

 

 

.  Make sure that the Stand-by switch is in the OFF position.  

 
 
 
 
 
 
 
 
 
 
 
 
 

  Connect the Power Cord to the printer as shown in the figure below. 

 
 
 
 
 
 
 
 
 
 
 
 
 

  Plug the other end of the Power Cord into the ground outlet as 

shown in the figure below.  

 

 

 

Power Cord 

1.  Make sure that the 

printer Stand-by switch 
is turned to the off 
position before 
connecting the power 
cord to prevent possible 
electric shock or 
damage to the printer. 

2.  Use only the power cord 

supplied with the printer. 
Use of any other cord 
may cause electric 
shock or fire. 

3.  Connect the power cord 

to a three-prong outlet 
only, with the third prong 
being a good ground 
(earth) connection. 

4.  Even if the Stand-by 

switch is turned off, the 
primary power remains 
ON, as this switch turns 
on/off the secondary 
power supply only.  
When the printer is not 
used for a long time, 
disconnect the power 
cord from the AC outlet.  

Power Cord 

 

Stand-by Switch