Brady 76800 ユーザーズマニュアル
7-20
Adding Objects
Setting bar code dimensions
Choose the Dimension tab on the Bar Code screen to set bar code measurements:
Figure 7-12. The Bar Code screen, Dimensions tab.
Use the Dimension tab to set these bar code options:
Height
Set the bar code height (in the unit of measure
specified on the System Setup screen Localization
tab) by entering a height or choosing from the
options list.
specified on the System Setup screen Localization
tab) by entering a height or choosing from the
options list.
Hint!
If you want to make a bar code taller,
setting the height here is preferable to using the
Height option on the Bar Code Size and Location
tab.
Height option on the Bar Code Size and Location
tab.
Density
Set the density in mils by choosing from this list.
The density is the thickness of the bars and how far
apart they are.
The density is the thickness of the bars and how far
apart they are.
Hint!
This setting determines the width of the
bar code.
Ratio
Set the width ratio by choosing from this list. Ratio
determines the relative width of the wide bars to the
narrow bars in the bar code.
determines the relative width of the wide bars to the
narrow bars in the bar code.