Brady 76800 ユーザーズマニュアル
Working with Cut-outs
10
-
11
2. Choose the Frame tab:
The Line
width and the
Line Color
options are
not available
if Cut out
frame is
enabled.
width and the
Line Color
options are
not available
if Cut out
frame is
enabled.
Figure 10-5. The Label Properties screen, Frame tab., on the
Color & Cut system.
3. Select a Frame shape option: Rectangle or Rounded rectangle.
4. Check the Cut out frame option.
5. When you finish setting Label Properties options, click OK. See Adding a
label frame - 6-31 for detailed information about the Label Properties options.
Calibrating the Cutter
If your cuts are not aligned correctly, you can adjust the plotter cutter calibration
values previously set at the factory. You begin by using the Setup option on the
Main Menu screen to calibrate the cutter.
values previously set at the factory. You begin by using the Setup option on the
Main Menu screen to calibrate the cutter.
Setting cutter calibration values
When you enter values in the Cutter Calibration fields, the values must be positive
or negative whole numbers. Each increment of the number adjusts the cut made by
.001 inch. For instance:
or negative whole numbers. Each increment of the number adjusts the cut made by
.001 inch. For instance: