Brady 76800 ユーザーズマニュアル
2-6
Installing supplies
Adjusting the ribbon cartridge
If a ribbon cartridge has been stored outside the printer, the ribbon between the
take-up spool and the wiper may have been exposed to dust. The dust on the ribbon
may transfer to the print head causing streaks or scratches on your labels.
take-up spool and the wiper may have been exposed to dust. The dust on the ribbon
may transfer to the print head causing streaks or scratches on your labels.
When a ribbon cartridge has been stored outside the printer, before installing it, you
should first advance the ribbon approximately 2 inches (or 250 millimeters)
counterclockwise, as shown in Figure 2-4.
should first advance the ribbon approximately 2 inches (or 250 millimeters)
counterclockwise, as shown in Figure 2-4.
Figure 2-4.
Adjusting the ribbon cartridge.
This will prevent any dust that may have accumulated on the ribbon from
transferring to the print head and affecting how your labels print.
transferring to the print head and affecting how your labels print.