Atlantis Land A02-IPCAM2-W54 ユーザーズマニュアル
IP Wireless Security Motorized Camera
A02-IPCAM2-W54_ME01
24
Advanced J Wireless
If you use a wireless camera, you can configure the respective settings in the Wireless submenu, which
contains two options: Setting and Site Survey.
contains two options: Setting and Site Survey.
Setting
Click the Setting item of the Wireless submenu to bring up the following page.
-
Wireless: The default setting is Disable. Select Enable/Disable to start/stop the wireless
function of the camera.
function of the camera.
-
Connection Mode: Use this option to determine the type of wireless communication for the
camera. There are two choices: Infrastructure mode and Ad-Hoc mode.
camera. There are two choices: Infrastructure mode and Ad-Hoc mode.
-
SSID: SSID (Service Set Identity) is the name assigned to the wireless network. It will auto-
detect and display the SSID of wireless network connected in this box. This default setting will
let the camera connect to ANY access point under the infrastructure network mode.
detect and display the SSID of wireless network connected in this box. This default setting will
let the camera connect to ANY access point under the infrastructure network mode.
-
Channel: This pull-down menu provides the wireless channel for communication. A “channel” is
a range of frequencies to be used in communication between the camera and access point in
Infrastructure mode, or the camera and PC/Notebook in Ad-Hoc mode. Select the appropriate
channel from the list provided depending on the regulatory region where the unit is sold.
a range of frequencies to be used in communication between the camera and access point in
Infrastructure mode, or the camera and PC/Notebook in Ad-Hoc mode. Select the appropriate
channel from the list provided depending on the regulatory region where the unit is sold.
-
Security Mode: Wireless network communications can be intercepted easily. This option will
help you protect your wireless network.
help you protect your wireless network.
-
Authentication: Open communicates the key across the network. Shared allows
communication only with other devices with identical WEP settings.
communication only with other devices with identical WEP settings.
-
Encryption Mode: This option allows you to configure the setting of data encryption. The WEP
key must be set before the data encryption is enforced.
key must be set before the data encryption is enforced.
-
Key Format: To enable WEP Encryption, you should decide the encryption format first by
selecting the ASCII or HEX option, and then input the WEP key (in the following Key 1~4 box).
selecting the ASCII or HEX option, and then input the WEP key (in the following Key 1~4 box).