Atlantis Land A02-IPCAM2-W54 ユーザーズマニュアル

ページ / 92
                                                                                                            
IP Wireless Security Motorized Camera
 
A02-IPCAM2-W54_ME01                                           
                   66 
 
 
 
Question 
Answer 
What is the wireless 
transmission range for 
the IP Wireless Security 
Motorized Camera?
 
Generally the wireless distance can go up to 100 meters 
indoors and up to 300 meters outdoors.  The range is 
limited by the number of walls, ceilings, or other objects 
that the wireless signals must pass through.  Typical 
ranges vary depends on the types of materials and 
background Radio Frequency (RF) noise in your home 
or business and the configuration setting of your network 
environment.   
 
Question 
Answer 
Can the IP Wireless 
Security Motorized 
Camera be used out-
doors?
 
The IP Wireless Security Motorized Camera is not 
weatherproof.  It needs to be equipped with a weatherproof 
case to be used outdoors and it is not recommended.
 
 
Question 
Answer 
What network cabling is 
required for the IP 
Wireless Security 
Motorized Camera?
 
The IP Wireless Security Motorized Camera uses Category 5 
UTP cable allowing 10 Base-T and 100 Base-T networking
 
 
Question 
Answer 
Can the IP Wireless 
Security Motorized 
Camera be setup as a 
PC-cam on the 
computer?
 
No, the IP Wireless Security Motorized Camera is an IP 
Wireless Security Motorized Camera used only on Ethernet 
and Fast Ethernet network and supported by wireless 
transmission.
 
 
Question 
Answer 
Can the IP Wireless 
Security Motorized 
Camera be connected 
on the network if it 
consists of only private 
IP addresses?
 
The IP Wireless Security Motorized Camera can be 
connected to LAN with private IP addresses.
 
 
Question 
Answer 
Can the IP Wireless 
Security Motorized 
Camera be installed 
and work if a firewall 
exists on the network?
 
If a firewall exists on the network, port 80 is open for ordinary 
data communication.  However, since the camera transmits 
image data, the default ports 5000, 5001 and 5100 are also 
required.  Therefore, it is necessary to open ports 5000, 5001 
and 5100 of the network for remote users to access the 
camera.