Toshiba B-EX ユーザーズマニュアル

ページ / 95
 
46
[Socket]: 
Select whether or not socket communication is enabled. 
Default Enable 
Options Disable, 
Enable 
 
[Port Number]: 
Set a port number used for socket communication. 
Default 8000 
Range 
0 to 65535 
 
[WEB Printer]: 
Select whether or not the Web server function is enabled. 
Default Disable 
Options Disable, 
Enable, 
Enable (External Memory)
 
 
[SNMP]: 
Select whether to enable or disable the SNMP feature. 
Default Enable 
Options Disable, 
Enable 
 
[SNMP Trap] Group 
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10]: 
Select whether to enable or disable the SNMP trap. 
Default Disable 
Options Disable, 
Error, 
Job End, Error & Job End 
When enabled, set the IP address of the terminals that monitors the SNMP trap. 
When this parameter is set to other than "Disable", entry of IP address becomes enabled. 
When "Disable" is selected, the IP address returns to the default. 
Default 0.0.0.0 
Range 
0.0.0.0 to 255.255.255.255 
 
[Server] Group 
[DHCP]: 
Select whether or not DHCP clients are enabled. 
Default Disable 
Options Disable, 
Enable 
 
[DHCP Host Name]: 
Set a host name. 
When no name is entered, the printer's MAC address is used. 
Use up to 32 alphanumeric characters to enter a name. 
 
[DHCP Client ID]: 
Set a DHCP Client ID. 
When "HEX" is selected for the [Input Type], set the ID using up to 128 characters ranging from "0" to 
"F". 
Enter two alphanumeric characters from "0" to "F". 
Entries are not case-sensitive. 
Two characters indicate one HEX character.  (Example: "0" -> "30" or "A" -> "41") 
Entering an odd number of characters results in an error. 
When "ASCII" is selected for the [Input Type], set the ID using up to 64 alphanumeric characters. 
 
[Input Type]: 
Select a code used for entering a DHCP client ID. 
When the code is changed, the currently set DHCP client ID is cleared. 
Default HEX 
Options HEX, 
ASCII