Sharp AR-FX13 ユーザーズマニュアル
58
DIALING AND TRANSMITTING
Once you have set the original (either in the RSPF or on the document glass), and have selected the desired
transmission settings, you are ready to dial the number of the receiving fax machine and transmit the original. You
can choose from one of the several ways of dialing that best suit your needs.
transmission settings, you are ready to dial the number of the receiving fax machine and transmit the original. You
can choose from one of the several ways of dialing that best suit your needs.
DIRECT KEYPAD DIALING
If the number of the fax you want to reach is not a Rapid key or Speed Dial number, use Direct Keypad Dialing to
manually enter it using the following procedure:
manually enter it using the following procedure:
1
Confirm that you have correctly set
the original in the SPF/RSPF or on the
document glass. (See "SETTING THE
ORIGINAL" (p.51))
the original in the SPF/RSPF or on the
document glass. (See "SETTING THE
ORIGINAL" (p.51))
2
Enter the number of the fax machine
you want to send to by pressing the
numeric keys.
you want to send to by pressing the
numeric keys.
If it is not correct, press
the [CLEAR] key (
the [CLEAR] key (
) to
backspace and clear one
digit at a time, and then
enter the correct number.
digit at a time, and then
enter the correct number.
3
Check the display. If the number of the
receiving machine is shown correctly,
press the [START] key (
receiving machine is shown correctly,
press the [START] key (
).
RAPID KEY DIALING
If the number you want to dial has been stored as a Rapid key number (See
"STORING NUMBERS FOR AUTOMATIC DIALING" (p.41)), you can dial it by
pressing the appropriate Rapid key as shown:
"STORING NUMBERS FOR AUTOMATIC DIALING" (p.41)), you can dial it by
pressing the appropriate Rapid key as shown:
SPEED DIALING
If the number you want to dial has been stored as a Speed Dial number, you can dial it using the following
procedure:
procedure:
1
Press the [SPEED/SEARCH] key and
then enter the two-digit number by
pressing the numeric keys (See
"STORING NUMBERS FOR
AUTOMATIC DIALING" (p.41)).
then enter the two-digit number by
pressing the numeric keys (See
"STORING NUMBERS FOR
AUTOMATIC DIALING" (p.41)).
If it is not correct, press
the [CLEAR] key (
the [CLEAR] key (
) to
backspace and clear two
digits at a time, and then
enter the correct number.
digits at a time, and then
enter the correct number.
2
Press the [START] key (
) and check
the name or number that appears in
the display.
the display.
1,2,3,
1,2,3,
SP. FUNC