Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Sharp
  4. AR-FX13
  5. ユーザーズマニュアル

Sharp AR-FX13 ユーザーズマニュアル

ダウンロード
ページ / 102
78
TIMER OPERATIONS
The timer function allows you to set a transmission or polling operation to be performed automatically at a time you 
specify. Up to five transmission operations or polling operations can be set at any one time, and the times they will 
be performed can be specified up to a week in advance.
You can use this function, for example, to take advantage of lower night time telephone rates without having to be 
there when the operation is performed.
● For a timer transmission, scan the original into memory when you set the transmission. Scanning the original into 
memory is convenient because you do not have to worry about original mix-ups or forgetting to load the original. 
● If the memory becomes full while the original is being scanned, "MEMORY FULL" will appear in the display.
• Press the [START] key (
) to transmit the pages that have been stored up to that point in memory. 
• Press the [CLEAR ALL] key (
) to cancel the entire transmission.
Setting up a timer transmission job:
1
Press the [MENU] key.
2
Press the [
] key (
) or [
] key (
) 
until "1:TIMER MODE" appears, and 
then press the [OK] key.
3
Press the [
] key (
) or [
] key (
) 
to select "1:SET".
To cancel a timer operation, select "2:CLEAR".
4
Enter the time at which transmission 
will take place with the numeric keys.
Enter two digits for the 
hour and two digits for 
the minute.
5
Press the [
] key (
) or [
] key (
) 
to select "AM" or "PM" and press the 
[OK] key.
Your fax machine
The scheduled 
time arrives
Recipient
beep
Transmission begins
Transmission
/reception
• Select the recipient
-sending method
-time
• Select transmission 
settings
memory
1,2,3,
1,2,3,
SP. FUNC
"1:TIMER MODE"
Selection
"1:SET"
Selection
1,2,3,
1,2,3,
SP. FUNC