Actiontec electronic V.90 ユーザーズマニュアル

For W

INDOWS

95/98

NSTALLATION

If you are replacing an existing modem in your computer system with this

modem, be sure to remove all other modem drivers. Go to: Start-Settings-

Control Panel and double-click on the System icon. Select the Device Man-

ager tab. Double-click on the Modems icon in the device tree to show the

modems installed. Highlight each modem listed by clicking once on the icon

next to the modem and then click the Remove button. It is also a good idea to

physically remove your old modem from the system. Note: once you remove

the old modem and its drivers from your system, you will need the old modem

driver diskette if you wish to reinstall it at a later date.

Figure 1: Win95 Modems Properties Panel

If you are going to use the TAM (Telephone Answering Machine) or speaker-

phone functions of the modem, you need to install the Unimodem V compo-

nents of Windows 95. If you have Windows 95 OEM Service Release 2 (Ver-

sion 4.00.950 B or above) or Windows 98, you do not need to install this

component as it is already built into the operating system.

To find the Windows 95 Version on your system, select:

Start-Settings-Con-

trol Panel. Double-click on the System icon and select the General tab. If

the version of Windows 95 is 4.00.950 or 4.00.950A, go to: Start-Programs

and select Windows Explorer. Go to the UNIMODEM directory of the CD-

ROM (the UNIMODEM driver is sometimes supplied on a separate floppy)

that came with your modem and right-click on UNIMODV.INF (or

UNIMODV, whichever is displayed) then click on Install. Restart your com-

puter to enable the drivers.