OKI 56801 ユーザーズマニュアル

• When Part. is selected, the common header of the first page is 

added in original size. 

• When Whole is selected, the first page is added at a reduced 

size.

05: SENDER ID: This function controls the printing of the 
Sender ID of your fax machine on the faxes you send. When 
turned on, your Sender ID, date and time will be printed on each 
page slightly outside the image area of your document. When 
turned off, your Sender ID, date and time will not be printed. 
However, some fax machines will print your TSI/CSI.
06: MONITOR VOLUME: This function sets the volume your 
fax machine uses for telephone line monitoring sounds during 
dialing. Available settings are Off, Low, Middle, High Middle 
and High.
07: BUZZER VOLUME: This function sets the volume of the 
various beep and alarm tones your fax machine emits during 
operations. Available settings are Low, Middle and High.
08: CLOSED NETWORK: This function allows you to program 
your fax machine to refuse to receive faxes from or transmit 
faxes to locations whose telephone numbers have not been 
programmed into the One-Touch keys or Auto Dial numbers of 
your fax machine. Using this function, you can set up a closed 
network of fax machines. If you do not want your fax machine to 
transmit faxes to or receive faxes from locations outside your 
network, select T/R. If you only want your fax machine to refuse 
to receive faxes from outside your network, select RX. Available 
settings are OFF, T/R and RX.

09: TX MODE DEFAULT: This function allows you to change 
default type of original, transmit and copy resolution settings of 
your fax machine. Unless you select otherwise using the 
Transmit Resolution/YES or Type of Original/NO keys, your fax 
machine is set to use the STD and NORMAL settings. If you are 
constantly sending faxes, which require some other combination 
of transmission modes, use this function setting to change the 
default transmission modes to any other combination of settings. 
While you are programming, the new default combinations will 
appear on the LEDs above the Transmit Resolution/YES or Type 
of Original/NO keys.
10: T/F TIMER PRG.: When set to the telephone/ fax answering 
mode, your fax machine automatically distinguishes between 
incoming voice and fax calls. If the incoming call is a voice call, 
your fax machine will ring to tell you to pick up the handset. If 
you do not answer, your fax machine automatically switches 
back to facsimile mode to allow the calling party to send a fax. 
The T/F TIMER function controls how long your fax machine 
waits before switching back to fax mode. Available settings are 
20 seconds or 35 seconds.
11: RING RESPONSE: This function controls how long your 
fax machine waits before answering an incoming telephone call 
when your fax machine is set to auto receive or telephone/fax 
auto switch answering modes. The available settings are 1 ring, 5 
seconds, 10 seconds, 15 seconds or 20 seconds.