Multi-Tech Systems E1 ユーザーズマニュアル

88 

 

  Values 

 

Automatic 

Disconnect-

ion  

-- The 

Automatic Disconnection 

group provides four options which 

can be used singly or in any 

combination.  

Jitter Value 

1-65535 

milli-

seconds 

The Jitter Value defines the average 

inter-arrival packet deviation (in 

milliseconds) before the call is 

automatically disconnected. The 

default is 300 milliseconds. A higher 

value means voice transmission will 

be more accepting of jitter. A lower 

value is less tolerant of jitter. 

Inactive by default. When active, 

default = 300 ms.  However, value 

must equal or exceed Dynamic 

Minimum Jitter Value.  

Call 

Duration 

1-65535 

seconds 

Call Duration defines the 

maximum length of time (in 

seconds) that a call remains 

connected before the call is 

automatically disconnected.  

Inactive by default.   

When active, default = 180 sec. 

This may be too short for most 

configurations, requiring upward 

adjustment. 

Consecutive 

Packets Lost 

1-65535 

Consecutive Packets Lost defines 

the number of consecutive packets 

that are lost after which the call is 

automatically disconnected.  

Inactive by default.  

When active, default = 30 

Network 

Discon-

nection 

1 to 65535 

seconds;  

Default = 

30 sec. 

Specifies how long to wait before 

disconnecting the call when IP 

network connectivity with the 

remote site has been lost.