OKI 5400 ユーザーズマニュアル

ページ / 104
Installation
29
Engl
is
h
you do not answer the telephone and someone tries to send you a fax 
message, your machine will not accept it. 
Telephone/Fax Auto Switch Mode [T/F]: When incoming calls are a 
mixture of fax and telephone calls, your best choice is the Telephone/Fax 
Auto SW mode. In this mode, your fax machine detects whether the 
incoming call is a fax or voice call. When the call is from another fax 
machine, your machine will switch to fax mode and receive the message. 
When the call is a voice call, your fax machine will ring like a telephone. 
If you do not answer, your fax machine will switch back to fax mode to 
allow the calling party to manually send a fax.
Telephone Answering Device Mode [TAD]: Use this mode if you have 
connected an answering machine to your fax machine. When a call is 
received and is not answered, your answering machine activates and is 
ready to send out your recorded outgoing message. At the same time, your 
fax machine monitors the incoming call to check if the call is a fax or voice 
call. If the incoming call is a fax call, your fax machine will receive the fax 
and no voice message will be recorded on your answering machine. If teh 
incoming call is a voice call, then your faqx machine will not activate and 
the calling party will be able to leave a voice message on your answering 
machine.
Note:
In some countries, the Telephone Answering Device 
mode is normally turned off. To have it turned on, 
contact your dealer. 
Memory Reception Mode [MEM]: Use this answering mode if you want 
incoming faxes to be stored in the memory of your fax machine and not 
immediately printed. You can then use the print function to print out any 
messages that have been stored in memory.
Fax Forwarding Mode [FWD]:  When set to this mode, your fax 
machine receives all fax messages into memory, and then automatically 
re-sends the fax messages to the forwarding number programmed into 
your fax machine. For information on setting the forwarding number, refer 
to Setting Forwarding Number in Installation.
PC Interface Mode [PC]: If you have purchased the optional PC 
Interface Board for your fax machine, this mode turns on the connection 
between your fax machine and a personal computer. Refer to the 
documentation you received with your PC Interface Board option for 
details.