OKI 5400 ユーザーズマニュアル

36

User’s Guide

3.

Enter the main fax number as follows: 

4.

Press the Start key.

5.

Enter the Location ID. This is a descriptive title up to 15 characters 
long. Refer to the instructions below. 

6.

Press the Start key. The display shows NO=<OR LOCATION>.

7.

Enter the alternate fax number. Refer to the instructions following 
Step 3.

8.

Press the Start key to finish programming the One Touch key. The 
display shows LOCATION PROGRAMMING.

9.

To continue programming One Touch keys, go back to Step 2. If 
you are finished programming, press the Select Function key.

10.

Lift off the plastic cover above the One Touch label. Using a pencil, 
write in the name for your newly-programmed One Touch key. 
Replace the cover.

To Do This

Use

Enter numbers

Numeric keypad

Enter spaces

Space One Touch key

Enter hyphens (i.e. to wait for dial 
tone)

Hyphen key

Enter pauses (i.e., to wait for outside 
lines)

Pause key

Add a switch from pulse to tone 
dialling for part of the call

*/Tone key

Move the cursor to make corrections

YES and NO keys.

To Do This

Use

Enter numbers

Numeric keypad

Enter spaces

Space One Touch key

Enter hyphens

Hyphen key

Enter alphabet characters

Locate the character you want on the numeric keypad. 
Press that key repeatedly until the character appears.

Enter a unique character.

Press the 0/Unique key repeatedly until the character 
you want appears. The following characters are 
available: ! # & ‘ ( ) * + , - . / : ; = ? _ ä ¤ ñ ö ü Æ Å Ø 
æ å ø.

Enter next character

Press the NO key to move the cursor to the next 
position for the next character.

Move the cursor to make corrections

YES and NO keys.