OKI 5400 ユーザーズマニュアル

68

User’s Guide

15:USER LANGUAGE: This function allows you to switch between the 
two languages programmed into your fax machine. 

16:INCOMING RING: This function controls the telephone ringing 
sound your fax machine makes when a call comes in. Available settings 
are on and off.

17:REMOTE RECEIVE: When you receive an incoming call, this 
function allows you to remotely tell your fax machine to switch from 
telephone to fax mode to receive an incoming fax. To use this function, use 
the keypad of a handset or an external telephone to enter the remote receive 
number you have programmed into your fax machine. Available settings 
are off, 00, 11, 22, 33, 44, 55, 66, 77, 88, 99, ** and ##. This function only 
works if your telephone system is a tone dialling system.

18:MEM./FEEDER SW.: This function controls how your fax machine 
normally transmits fax messages to one location. Either scanning the 
document into memory first and then start dialling, or by transmitting 
directly from the document feeder after dialling. Available settings are 
MEM. and FEED.

19:POWER SAVE MODE: This function substantially reduces the 
amount of power your fax machine consumes when it is not in use. When 
this function is on, your fax machine automatically switches to power save 
mode after it has been idle for three minutes. When this occurs, your 
display shows: POWER SAVE MODE, PRESS“START” TO EXIT. 
While in this mode, your fax machine automatically switches back to full 
operation after you press the Start key, when the telephone rings, when the 
telephone handset is lifted, or when a document is loaded. Available 
settings are on and off. 

20:ECM FUNCTION: The error correction mode function helps your fax 
machine to improve communication in areas where telephone line 
conditions are poor. Available settings are on and off.