OKI 4500 ユーザーズマニュアル
32
OKIFAX 4500
6.
Press the
START
key. The display shows:
NO=<OR LOCATION>
7.
Enter the alternate fax number. Refer to the instructions
following Step 3.
following Step 3.
8.
Press the
START
key to finish programming the One Touch
key. The display shows:
LOCATION PROGRAMMING
ENTER (SRCH, OT, A/D, #)
9.
To continue programming One Touch keys, go back to Step
2. If you are finished programming, press the
2. If you are finished programming, press the
SELECT
FUNCTION
key.
10. Lift off the plastic cover above the One Touch label. Using
a pencil, write in the name for your newly programmed
One Touch key. Replace the cover.
One Touch key. Replace the cover.
Note: If you want to delete any programming for a One
Touch key, follow Steps 1 - 2. At Step 3 press the
Touch key, follow Steps 1 - 2. At Step 3 press the
9/SPACE
key until the number is deleted, then continue with Steps
8 - 10.
8 - 10.
One Touch Parameters
If you are experiencing problems communicating with a remote
location in a very noisy telephone area, set up a One Touch key
for that location and try turning Echo Protection on or lowering
the transmission fax speed/rate for that One Touch key.
location in a very noisy telephone area, set up a One Touch key
for that location and try turning Echo Protection on or lowering
the transmission fax speed/rate for that One Touch key.
1.
Press the
SELECT FUNCTION
key.
2.
Press the
USER PROG
One Touch key. The display shows:
1:FUNC. PROGRAMMING
YES (
ß
ß
ß
ß
ß
) NO (
à
à
à
à
à
/1-7)
3.
Press the
ô
YES
key. The display shows:
FUNCTION NO [ ]
ENTER 01-28
4.
Using the numeric keypad, enter 28. The display shows:
28:ONE TOUCH PARAM
YES (OT) NO (
à
à
à
à
à
)
5.
Press the One Touch key for the location whose settings
you want to change. The display shows:
you want to change. The display shows:
ECHO PROTECTION
[OFF] YES (
ß
ß
ß
ß
ß
) NO (
à
à
à
à
à
)
6.
Press the
NO
õ key to switch Echo Protection on.
7.
Press the
ô
YES
key to confirm your selection. The display
shows:
FAX SPEED
[14.4K] YES (
ß
ß
ß
ß
ß
) NO (
à
à
à
à
à
)
8.
Press the
ô
YES
key to confirm the fax speed, or press the
NO
õ key until the desired fax speed is selected.
9.
Press the
ô
YES
key to confirm your selection. The display
shows:
28:ONE TOUCH PARAM
YES (OT) NO (
à
à
à
à
à
)