Brother FAX 3750 オーナーマニュアル

136

A P P E N D I X A

Before You Install the Optional
Multi-Function Link Pro Software

Installation instructions will be included with PCI-2CD. However, it is
important that you hook up your fax machine to your computer before you
install the software.

If You Don’t Have a CD-ROM Drive

All optional software is supplied on CD-ROM. If you need a Floppy
Diskette version, you can order it from Brother. (Only Multi-Function Link
Pro and Visioneer PaperPort™ LE are available on Floppy Disks, item
numbers PCI2D31 (for Windows

3.1 or 3.11) and PCI2D95 (for Windows

95, 98). If you are using Windows NT

Workstation Version 4.0, the

software is not available on Floppy Disks.) You must tell the Brother
Representative the version of Windows

you are using and your fax machine

model number. At the same time, we recommend you order the shielded
IEEE 1284 Bi-directional Cable (UG4558001). To order, call Brother at
1-888-879-3232 (USA) or 1-800-668-2768 (from within Canada).

Computer Requirements

The following are the minimum computer requirements you need to set up
and operate the fax machine as a printer. Use only a shielded interface cable
that is IEEE-1284 compliant, and that is less than 6.0 feet (1.8 meters) long.

CPU

80486/66MHz or higher (Windows

3.1, 3.11 or 95, 98)

Pentium 75 or Higher (Windows NT

Workstation

Version 4.0)

RAM

8MB or greater for Windows

3.1 or 3.11

8MB or greater for Windows

95, 98 (16MB

recommended)
16MB or greater for Windows NT

Workstation

Version 4.0 (32MB recommended)

Hard Disk Drive

50MB Available Disk Space CD-ROM1

Operating System

Windows

3.1, 3.11, 95, 98 or NT

Workstation Version

4.0, with your Windows

version