Dialogic 6.2 ユーザーズマニュアル

transfer

November 2009

162

phonenum

Caller C’s telephone number.

options

-u unit_num

The unit number to use.  

Value: 0 to (max channels-1)

-m b_channel_mode

The channel mode used if the protocol can do 1 

or 2 B-channel transfer. If the protocol 

supports both, transfer capability is 

LINE_XFER_ALL. 
Different protocols support different modes: 

„

Hookflash supports 1 B-channel transfers. 

„

RLT supports 2 B-channel transfers. 

„

ETSI BRI, ETSI PRI, T1-ISDN, NTT BRI, 

and NTT PRI support both 1 and 2 

B-channel transfers.

Values: 1, 2
Note: This option does not support the 

LINE_XFER_TWO_CHAN_NEEDS_NAILUP 

transfer capability.

-s SUPERVISED mode

 

prompt_file

Turns on supervised mode. 
Value: a valid prompt file.

-t line_state

Transfer is completed at different states while 

making the call in unsupervised mode. In 

supervised mode, the only state allowed to 

complete transfer is BST_CONNECTED.
Value: BST_DIAL_COMPLETE 

BST_ALERTING 

BST_CONNECTED

-h

If transfer capability is 

LINE_XFER_TWO_CHAN, this option puts 

the first call on the first bchannel on hold 

before making the enquiry call on the second 

bchannel.