Panasonic DP-180 ユーザーズマニュアル

56

Check if the Power Switch (Main Power Switch
on the Left Side of the machine) is turned ON
and if the power cord is plugged into the AC
outlet.

Does the display light?

Press Energy Saver key on the control panel.

Does the Energy Saver key flash (or light)
and the display is turned OFF?
(See page 32)

Perform actions in accordance with each
message.

Does any of the U## codes and messages
appear on the display?
(U1, U13, U16....etc.)

Add paper. (See page 14)

Does the Add Paper indicator and message
appear on the display?

Remove the misfed paper. (See page 18)
Be sure to set paper as adjusted with paper
guides. (See page 42)

Does the message and J## Codes appear on
the display? (J00, J01, J02,...etc.)

Turn the Power Switch on the Left Side of the
machine to the OFF* and ON position. If the
error code does not clear, call your Service
provider.

Does E#-## codes and messages appear on
the display?

Turn the Power Switch on the Left Side of the
machine to the OFF* and ON position.

The machine would not accept the next job
during operation, instructed job would not be
accepted for a long time period or job would
not be completed.

Press the Darker Key.
(See page 25)

Does the exposure indicator say "LIGHTER"?

Replace the Toner Cartridge.
(See page 16)

Does the replacing Toner Cartridge and
message appear on the display?

NOTE:
*

If the Hard Disk Drive Unit (DA-HD19) is
installed, see page 13.