Multi-Tech Systems MT5634SMI V.92 ユーザーズマニュアル
Chapter 1 – AT Commands, S-Registers and Result Codes
Multi-Tech Systems, Inc. SocketModem MT5634SMIxx Reference Guide (S000263C)
14
Command:
&V Display
Current
Settings
Values:
N/A
Description:
Displays the active modem settings.
Command:
&Wn
Store Current
Configuration
Values: n
= 0 or 1
Default: 1
Description:
Description:
&W0
Stores current modem settings in non-volatile memory and causes them to
be loaded at power-on or following the ATZ command instead of the
factory defaults. See &F command.
be loaded at power-on or following the ATZ command instead of the
factory defaults. See &F command.
&W1
Clears user default settings from non-volatile memory and causes the
factory defaults to be loaded at power-on or following the ATZ command.
factory defaults to be loaded at power-on or following the ATZ command.
Command: &Zy=x Store Dialing Command
Values: y
= 0–2 (0–1SMI-Parallel {internal})
x = Dialing command
Default: None
Description: Stores
Description: Stores
dialing
command
x in memory location y. Dial the stored number using the
command ATDS=y. See Also the #CBS command, a callback security command.
Command: \An
Select Maximum MNP Block Size
Values: n = 0, 1, 2, or 3
Default: 3
Description:
Default: 3
Description:
\A0 64-character
maximum
\A1
128-character
maximum
\A2
192-character
maximum
\A3
256-character
maximum
Command: \Bn
Transmit Break
Values: n = 0–9 in 100 ms units
Default: 3
Description:
Default: 3
Description:
In
non-error-correction mode only, sends a break signal of the specified length to a
remote modem. Works in conjunction with the \K command.