Multi-Tech Systems MTCBA-E1 ユーザーズマニュアル
13
Multi-Tech Systems, Inc. MultiModem Cell User Guide
Activate Your Wireless Account
Please refer to the wireless account Activation Notices included with your unit. Choose the one for your wireless
network provider and follow the directions to activate your account.
network provider and follow the directions to activate your account.
Phone Numbers for the Wireless Modem
Every wireless modem has a unique phone number. The phone number may simply be given to you by your
wireless service provider or it may be on the SIM card or both. Wireless provider implementations may vary.
wireless service provider or it may be on the SIM card or both. Wireless provider implementations may vary.
Insert the SIM Card into Holder [if required]
The MultiModem requires the power supply connection to begin operation. It also requires a SIM card (Subscriber
Identity Module) to operate on a GSM network. To install the SIM, do the following:
Identity Module) to operate on a GSM network. To install the SIM, do the following:
1.
Using a small Phillips screwdriver, remove the two SIM door screws and remove the SIM door.
Note:
When changing a SIM, ensure that power is removed from the unit.
2.
Insert the SIM card into the card holder. The above graphic illustrates the correct SIM card orientation.
3.
Verify that the SIM card fits into the holder properly and then replace the cover.