Zhone Technologies 4929 DSLAM ユーザーズマニュアル
Configuration Using the NMS
70
4929 DSLAM Installation and User’s Guide
4929-A2-ZN20-30
SNR Advanced Configuration
SNR settings may greatly affect ADSL performance. Do not change SNR
settings unless so advised by your service provider.
settings unless so advised by your service provider.
To configure SNR settings:
1 Click on the Advanced Config tab. The Configuration SNR settings
screen appears.
2 Select or enter the following parameters:
Parameter
Description
Port
Select a port from the drop-down list.
SNR (dB) Setting
Specify the upstream and downstream Signal to
Noise Ratio settings for the selected ports.
Reed Solomon Error
Correction Settings:
Delay
Specify the upstream and downstream
Reed-Solomon delay.
Reed Solomon Error
Correction Settings:
Correction
Specify the upstream and downstream
Reed-Solomon correction.
EC/FDM
Specify the upstream and downstream Echo
Cancellation or Frequency Division
Multiplexing mode.
Fast Buffer Setting
Specify the buffer setting: Fast or Interleave.