Zhone Technologies 4929 DSLAM ユーザーズマニュアル

4929-A2-ZN20-30

4929 DSLAM Installation and User’s Guide

75

The 4900 Series DSLAMs have an integral command line interface (CLI) that 
can be accessed by direct connection to the COM port or by Telnet to the 
DSLAM’s management address.

z

Straight-Through RJ45 to RJ45 Ethernet Cable – Required for 

establishing a direct connection from the COM port to a DB9 adapter.

z

DB9 Female to RJ45 Male Adapter – Required for conversion of your 

PC's RS232 serial port for use with the RJ45 to RJ45 Ethernet cable.  

z

Terminal Emulation Program – Required for running the CLI over a 

direct connection. The program must emulate a VT100 terminal.

z

Telnet Client – Required for remote management with the CLI. 

Microsoft Windows Operating Systems (98, 2000, NT, and XP) include a 

Telnet client which is executed using the Windows command prompt 

(cmd.exe). If you are using an operating system other than Windows, you 

may need to install a Telnet client.

To connect a PC directly to the DSLAM to use the CLI:

1 Plug a DB9 to RJ45 adapter into the RS232 serial port on your PC. See 

Pin Assignments.

2 Connect one end of a straight-through RJ45 to RJ45 Ethernet cable into 

the adapter plugged into your PC, and the other end of the cable into the 

COM port on the face of the DSLAM.