Zhone Technologies 4929 DSLAM ユーザーズマニュアル

4929-A2-ZN20-30

4929 DSLAM Installation and User’s Guide

81

The 4900 Series DSLAM can be managed using the Simple Network 
Management Protocol (SNMP). 

This implementation uses a portion of SNMP v1.0: the MIB-II System Group 
and Interfaces Group of OIDs. SNMP uses MIBs (Management Information 
Bases) sanctioned by the IETF (Internet Engineering Task Force). MIBs are 
composed of OIDs (Object Identifiers), each of which represents a system 
configuration or request for data.

You will not be able to manage your DSLAM via SNMP until you have set 
the unit IP address, subnet mask, and default gateway. See 

 in Chapter 5, Configuration Using the NMS or 

 in Chapter 6, Command Line Interface.

You must have a MIB browser installed on your PC in order to utilize the 
Management Information Base. 

1 Launch your MIB browser and perform any necessary program 

configurations. Refer to your MIB browser user manual for further 

information. 

2 Download the MIBs from the Zhone website. Refer to your MIB browser 

user manual for instructions on how to compile the OIDs into your MIB 

browser.