Black Box MD885AE-R2 ユーザーズマニュアル

CONNECT g,u

Connect to diagnostic port of modem at group address 
g, unit address u.  An  address must be specified unless 
the wildcard character * is used: CONNECT *  
(meaning Connect to local modem; address  
unknown/unspecified.).  When the connection is made, 
the DTE displays the modem’s  address.  Echo, line 
feed, and Auto-Display are enabled.

CON g,u 

CON performs same functions as CONNECT 
command, except that echo, line feed, and Auto-
Display are disabled.  The wild card character * may be 
used: CON * .

NOTE: The remaining commands listed in this table will function only if
CONNECT or CON (with address or *) has been previously issued.

D

Displays the current front-panel LCD screen of the 
connected modem on the DTE monitor.  

E 

Performs same function as front panel ENT button.  
(Exits from screen.)

1, 2, or 3

Performs same functions as corresponding buttons on 
front panel.  (Selects choice 1, 2, or 3  from LCD.)

> or .  

Performs same function as right arrow on the modem 
front panel.  (Displays next menu  screen.)

< or , 

Performs same function as left arrow on the modem 
front panel.  (Displays previous menu  screen.)

RESET

Resets the Modem without changing option settings.  
(Same as selecting RESET from the  MAIN MENU.)

FRESET

Resets the Modem to factory defaults.  (Reconfigures 
modem to Hayes mode default settings).