Enfora MLG0208PB001 ユーザーズマニュアル

ページ / 82
Enfora Enabler II-G Assisted GPS 
Modem Integration Guide 
 
2.
 
Configure the COM port as displayed below. 
 
Figure 23 COM Port Settings 
 
11.1.2.  Initialization (AT Command Interface) 
 
In the GSM vocabulary, a call from GSM mobile to the PSTN is called a "mobile-originated call" or 
"outgoing call".  A call from the fixed network to a GSM mobile is called a "mobile-terminated call" 
or "incoming call." 
 
In the following examples, “Entry” refers to the application.  The following convention describes 
the direction of the data exchange: 
 
• 
The data exchange from the customer application to the Enfora Enabler II-G A-GPS module 
is designated as: 
 
Entry 
 
The data exchange from the Enfora Enabler II-G A-GPS module to the customer 
application is designated as: 
 
Response 
 
Note: 
With the exception of the +++ command (Online Escape Sequence), all commands 
must be preceded by the AT attention code (or command prefix) and terminated by 
pressing the <CR> character. 
 
MLG0208PB001 
55 
Version1.01 – 10/3/2006