MRV Communications TS5000/XXX (TS5000G/XYZ/V** ユーザーズマニュアル

M R V   C o m m u n i c a t i o n s ,   I n c .   –   I n s t a l l a t i o n   M a n u a l  

34 

 

Interfaces 
Check the specifications compatibility (type, data rate) between the TereScope and 
the peripheral equipment interfaces. 

Chose an appropriate BER (Bit Error Rate) tester for checking the physical link 
quality. A portable one is preferred for convenient use in the field.  
 
A ping test or a file transfer between two workstations - connected to the 
networking equipment - is useful and easy to implement for testing the 
performance of the whole configuration. 

Dip-switch 
Set all the DIP switch toggles (other than 8 and 10 which are for SNMP 
management and Fusion) to the OFF position for normal operation.  

 

 

 

Peripheral equipment 
Check the operating of the peripheral equipment connecting them through cables 
(see Configuration 1 below). 

 

Interfaces 
Check the specifications compatibility (type, standard compliance) between the link 
and the peripheral equipment interfaces. 

Chose an appropriate BER (Bit Error Rate) tester for checking the physical link 
quality. A portable one is preferred for convenient use in the field.  
 

•  Main Dip-Switch: Set all the DIP switch toggles (other than 8 and 10 

which are for SNMP management and Fusion) to the OFF position 
for normal operation. 

•  Dip switch under the port in use: - switches 3&4 OFF for normal 

operation.  

- Line coding (AMI or HDB3) – Toggle 1. 
- Receive Sensitivity (Short/Long Haul) – Toggle 2. 
- Impedance (75 ohm/120 ohm) – Toggle 5.