Roland Fantom-S88 ユーザーズマニュアル
124
Editing a Sample
Importing a Audio File
Here’s how an audio file (WAV/AIFF) can be loaded into memory
as a sample.
as a sample.
Place the audio files in the “TMP/AUDIO_IMPORT” folder on
the user memory or memory card. For details on how you can
use your computer to copy a file into the user area or memory
card, refer to p. 184.
the user memory or memory card. For details on how you can
use your computer to copy a file into the user area or memory
card, refer to p. 184.
1.
press [MENU] to select “Import Audio”, and then press
[ENTER].
2.
Press [1 (User)] or [2 (Card)] to select the import-source
area.
User: Select a file from the user area.
Card: Select a file from the memory card.
3.
Use [CURSOR] to move the cursor to the “TMP/
AUDIO_IMPORT.”
4.
Press
or
, then select the file that you want to import.
If you want to select two or more samples, press [5 (Mark Set)] to
add a check mark (
add a check mark (
✔
) to the files that you want to select. To
remove the check mark, press [4 (Mark Clear)].
If you hold down [SHIFT] and press [5 (Mark Set All)], a check
mark will be added to all files of the selected bank. If you hold
down [SHIFT] and press [4 (Mark Clr All)], check marks will be
removed from all selected files.
mark will be added to all files of the selected bank. If you hold
down [SHIFT] and press [4 (Mark Clr All)], check marks will be
removed from all selected files.
5.
Press [8 (Import)].
A message will ask you for confirmation.
* To cancel, press [7 (Cancel)].
6.
Press [8 (Exec)].
The file will be imported, and the Sample List screen will appear.
* To cancel, press [7 (Cancel)].
The imported file will be added to the sample list as a sample.
This sample is temporary, and will be lost when you turn off the
power. If you want to keep it, press [WRITE] to save the data.
This sample is temporary, and will be lost when you turn off the
power. If you want to keep it, press [WRITE] to save the data.
Displaying Sample Edit Screen
1.
When you press [SAMPLE EDIT] in the sampling section.
The Sample Edit screen will appear.
fig.SMPL06_50
Samples that you edit will be lost when you turn off the power.
If you want to keep them, you must Save them (p. 134).
If you want to keep them, you must Save them (p. 134).
Magnifying/Shrinking the
Waveform Display (Zoom In/Out)
Here’s how to change the magnification of the sample display.
1.
In the Sample Edit screen, press [7 (Zoom In/Out)].
The Zoom In/Out sub-window will appear.
fig.SMPL11_50
2.
Use [CURSOR] to change the magnification of the display.
• Horizontal axis (time axis): 1/1–1/65536
Press
to increase the display magnification.
Press
to decrease the display magnification.
* Either turn the VALUE dial or use [INC], [DEC] to adjust this
setting.
• Vertical axis (waveform amplitude axis): x1–x128
Press
to increase the display magnification.
Press
to decrease the display magnification.
3.
Press [8 (Close)] to close the sub-window.
Even without displaying the Zoom In/Out sub-window, you
can press CURSOR
to expand/shrink the horizontal
axis, or hold down [SHIFT] and press CURSOR
to
expand/shrink the vertical axis.
Reference_e.book 124 ページ 2003年7月14日 月曜日 午後3時25分