JVC PU30425 ユーザーズマニュアル

If you have programmed your
recorder to timer-record a
programme or a series of
programmes, a warning appears
on screen to tell you that the
recording is to start in 5 minutes.

● The warning only appears if you’re not in the Timer mode at

that time.

● If this recorder is being used as the player for tape dubbing,

the warning screen is recorded on the tape in the other video
recorder.

The warning blinks for the entire 5 minutes leading up to the
start of timer recording. To clear the display, press CANCEL.

6

q

1

2

4

5

3

6

8

0

7

9

2

1

3

ACCESS PROGRAMME

SCREEN

Press PROG CHECK. Each time you press the next
program’s information appears.

● Press OK and watch the front display panel as the

Start and Stop times, the Date and the Preset appear.

● If the recorder is turned on and the TV is set to its

VIDEO mode, you can check program information on
screen as well.

If All Information Is Correct . . .
. . . programming is completed.
If You Wish To Revise Data . . .
. . . with the recorder's power turned on, go to step 2.
If You Wish To Cancel A Program . . .
. . . with the recorder's power turned on, press CANCEL.

All information you input is deleted.

REVISE PROGRAMME IN-

FORMATION

Input the appropriate data using the START +/–, STOP
+/–, DATE +/– and TV PROG. +/– buttons on the
remote control.