ONKYO ABX-N300 ユーザーズマニュアル

En-

34

• To operate your iPod/iPhone using the remote 

controller, point the remote controller toward the 
ABX-N300’s remote control sensor (see page 8).

• Make sure your iPod/iPhone is properly seated in the 

ABX-N300’s iPod dock. (see pages 9 and 16).

• Disconnect your iPod/iPhone from the dock, and then 

firmly insert it back into the dock.

• If your iPod or iPhone is in a case, remove the case 

before inserting the iPod or iPhone (see page 9).

• Disconnect your iPod/iPhone from the dock, and then 

firmly insert it back into the dock.

• Power-off the ABX-N300, or disconnect the AC 

adapter. Then turn on the power once again, and 
connect your iPod/iPhone.

• Make sure that the network server has the correct 

settings (see page 20).

• Make sure that the network server is running.
• Make sure that the network server is correctly 

connected to your home network.

• Make sure that the router’s LAN port is correctly 

connected to the ABX-N300.

• Make sure that the correct IP address is assigned in the 

ABX-N300’s “Network Info” (see page 30).

• Make sure that the network server meets the operating 

requirements (see page 32).

• If you’re using a computer as the network server, try 

closing all application software other than the server 
software (such as Windows Media

®

 Player 12).

• The playback sound might be interrupted if your 

computer is downloading or copying a large amount of 
files.

• Make sure that the format being transmitted by the 

radio station is supported by the ABX-N300 
(see page 32).

• The radio station may be off air or overly busy. Try 

again after a while.

• Check whether you can connect to the Internet from a 

different device. If not, power-off all devices 
connected to the network, wait for a while, and then 
turn them on again.

• Make sure that your router’s LAN port is correctly 

connected to the ABX-N300.

• Make sure that the correct IP address is assigned in the 

ABX-N300’s “Network Info” (see page 30).

• Depending on your ISP, you might need to make 

proxy server setting.

• Make sure you’re using a router and modem that are 

supported by your ISP.

• Make sure that the network settings are correct 

(see page 20).

• Make sure that the router is set correctly.
• If the ABX-N300 is connected via a wireless LAN, the 

state of the radio signal may make it impossible for the 
ABX-N300 to connect to the server, or may cause the 
connection to be interrupted. Try connecting via a 
wired LAN.

• Is the file you’re attempting to play supported by the 

ABX-N300 (see page 32)?

• If the ABX-N300 is connected via a wireless LAN, the 

state of the radio signal may make playback 
impossible, or may cause the audio to be interrupted. 
Try connecting via a wired LAN.

• In order to play back music files from a computer, 

you’ll need to start up Windows Media

®

 Player 11 or 

12, and make settings for it (see pages 20).

• After switching the input to something other than 

“AirPlay,” pause iTunes or your iPod touch/iPhone/
iPad and wait at least ten seconds before resuming 
playback.

• Click the AirPlay icon [] to temporarily disable the 

iTunes or iPod touch/iPhone/iPad connection, and 
then try reconnecting and playing back (see page 17).

• Try turning the ABX-N300’s power off and then on 

again. Alternatively, disconnect the AC adapter, and 
wait at least ten seconds before reconnecting it and 
turning the power on again.

• Try resetting the ABX-N300 (see page 33).
• Try restarting or resetting iTunes or your iPod touch/

iPhone/iPad.