Motorola CPCI-6020 ユーザーズマニュアル

Read all notices and cautions prior to unpacking the product.

To inspect the shipment, perform the following steps:

1. Verify that you have received all items of your shipment.

2. Check for damage and report any damage or differences to customer service.

3. Remove the desiccant bag shipped together with the board and dispose of it 

according to your country’s legislation.

Before installing the CPCI-6020-MCPTM-01, read these sections for important information on 
module configuration and operations.

The CPCI-6020 provides two 16550 compatible asynchronous serial interfaces: COM1 and 
COM2. The COM1 port signals are wired to the front panel RJ-45 connector, but it may 
optionally be wired to the backplane via J5 instead. The COM2 port is wired to the J5 connector 
only.

COM1 is routed to an RJ-45 connector located at the rear panel of the CPCI-6020-MCPTM-01. 
COM2 can be accessed by a planar 9-pin header on the transition module. The COM2 signals 
are also wired to the PMC I/O connector for possible access through PMC I/O module.