Motorola CPCI-6020 ユーザーズマニュアル

Before you remove your module, please read all cautions, warnings and instructions presented 
in this section and the guidelines explained in 

.

Hot swap compliant modules may be removed while the system is powered on. If a module is 
not hot swap compliant, you should remove power to the slot or system before removing the 
module. See 

 for more information.

To remove a board module, follow these steps:

1. Loosen the module’s captive screws at both ends of the front panel.

2. Begin to remove your module by unlatching the ejector lever (the lower lever on 

vertically mounted boards). See 

. Do not remove the module immediately.

3. Once the applications and operating system running on the board have stopped and 

it is safe to remove the board, open both ejector levers to partially unseat the module 
from the backplane connectors.