Motorola CPCI-6020 ユーザーズマニュアル
CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)
Hardware Preparation and Installation
System Considerations
56
A default baud rate of 9600 is used for serial ports on CPCI-6020 boards. After power-up, the
baud rate can be changed using the PPCBug PF (Port Format) command via the command line
interface. Whatever the baud rate, some type of hardware handshaking; either XON/OFF or via
the RTS/CTS line is desirable if the system supports it.
baud rate can be changed using the PPCBug PF (Port Format) command via the command line
interface. Whatever the baud rate, some type of hardware handshaking; either XON/OFF or via
the RTS/CTS line is desirable if the system supports it.