Motorola ML910TM ユーザーズマニュアル
2
ML910 R1.0 RF Pass-through Upgrade Procedure, Version A
bootable disc for the downloaded ISO
file. This procedure assumes Nero 8 Essentials will be used,
but Nero 7 operation is similar, and most CD/DVD burning software can write ISO files to disc.
CD or DVD Media A blank CD-R or CD-RW disc to become the bootable disc. The following DVD
formats are compatible with the Dual drive: DVD±R, DVD±RW and DVD±R DL.
formats are compatible with the Dual drive: DVD±R, DVD±RW and DVD±R DL.
CD Reader If the ML910 notebook does not already have its own Combo or Dual drive installed, you
can either temporarily install one in its media bay or use an external drive connected through one of
the notebook’s USB
can either temporarily install one in its media bay or use an external drive connected through one of
the notebook’s USB
ports.
High-Speed Internet Access Since the upgrade package is very large (>60MB) we recommend it
be downloaded over a high-speed network.
be downloaded over a high-speed network.
Experience in Performing Upgrade Procedures These instructions are written with the
understanding that the person performing the upgrade is already familiar with the terms and similar
computer support procedures, and is able to adapt to variations that may be encountered, due to
customer-applied configurations, policies, etc.
understanding that the person performing the upgrade is already familiar with the terms and similar
computer support procedures, and is able to adapt to variations that may be encountered, due to
customer-applied configurations, policies, etc.
Caution
It is critically important that the EC BIOS procedure be performed with the
utmost care. Among other precautions, make sure the ML910 is securely
plugged into a reliable AC power source. If this FLASH procedure should
be interrupted and fail, there is no “undo” or recovery procedure. The
ML910 would need to be returned to Motorola’s Service Depot for repair.
utmost care. Among other precautions, make sure the ML910 is securely
plugged into a reliable AC power source. If this FLASH procedure should
be interrupted and fail, there is no “undo” or recovery procedure. The
ML910 would need to be returned to Motorola’s Service Depot for repair.
Support If you are unsure of any step in this procedure or otherwise need Motorola support, please
call the Motorola System Support Center (SSC) at 1-800 221-7144. You may key in 2, 2 and 1 to
bypass the greeting and be directed to the ML910 support team.
call the Motorola System Support Center (SSC) at 1-800 221-7144. You may key in 2, 2 and 1 to
bypass the greeting and be directed to the ML910 support team.
1
ISO (International Organization for Standardization) refers to a standardized file format (.iso) used for optical
discs.
2
USB (Universal Serial Bus) refers to the standard serial interface receptacles found on most newer computers.
The ML910 notebook includes three USB ports.