Motorola MT2090 ユーザーズマニュアル
10 - 2 MT2070/MT2090 User Guide
Connecting to an IBM 468X/469X Host
Connect the device directly to the host interface.
Figure 10-1
IBM Direct Connection
1.
Attach the modular connector of the IBM 46XX interface cable to the cable interface port on the device.
2.
Connect the other end of the IBM 46XX interface cable to the appropriate port on the host (typically Port 9).
3.
Select the port address by scanning the appropriate bar code from
.
4.
To modify any other parameter options, scan the appropriate bar codes in this chapter.
Host Port Connector
Interface Cable
NOTE
Connect a power supply to the cradle (not shown) for fast charging.
NOTE
Interface cables vary depending on configuration. The connectors illustrated in
are examples
only. The connectors may be different than those illustrated, but the steps to connect the device are the
same.
same.
NOTE
The only required configuration is the port address. The IBM system typically controls other device
parameters.
parameters.