ONKYO DS-A27 ユーザーズマニュアル

11

When the OSD mode is set to On, you can 
change the background color and set the 
screen saver.

1. Press the [MENU] button repeatedly to 

select the top menu.

2. Use the Up and Down arrow [

]/[

] but-

tons to select “Settings,” and then press the 
[SELECT] button.

3. Use the Up and Down arrow [

]/[

] but-

tons to select Background Color or Screen 
Saver, and then press the [SELECT] button.

4. Use the Up and Down arrow [

]/[

] but-

tons to select an option, and then press the 
[SELECT] button.

■ Background Color
You can change the background color of the 
onscreen display on your TV to any one of the 
following eight colors: None (black), Blue1, 
Blue2, Green1, Green2, Magenta, Red1, or 
Red2.
■ Screen Saver
You can set the time at which the screen saver is 
activated to any one of the following four 
options: 1 minute, 5 minutes, 10 minutes, or Off 
(screen saver off ).
When the screen saver activates, the onscreen 
display on your TV disappears. Press any button 
on the remote controller to cancel the screen 
saver and resume the onscreen display.

While the OSD mode is set to On, you can set 
the RI Dock’s video output to PAL or NTSC.
If the onscreen display looks distorted on your 
TV, try changing the TV system.
•

While pressing and holding down the 
[SETUP] button, press the VOLUME Up [

] 

button for more than 3 seconds to select 
NTSC, or press the VOLUME Down [

] but-

ton for more than 3 seconds to select PAL.

■

Depending on your amp, you may also be able 
to use the following functions.

• System On Function
When you turn on your amp, the iPod turns on 
as well. With some amps, you may need to 
press the [ON] button on your amp’s remote 
controller’s twice to turn on the other compo-
nents in your system.

• System Off Function
When you turn off your amp, the iPod turns off 
as well. 

If you start iPod playback while your amp is on 
Standby, your amp will automatically turn on 
and select your iPod as the input source. Then, 
your iPod will start playback.

If you start iPod playback while listening to 
another input source, your amp will automati-
cally select your iPod as the input source.

• Timer Play
You can use your amp’s Timer function to turn 
on your amp and iPod and start playback at a 
specified time. 

• Linked Dimmer Operation
When you use your amp’s Dimmer function to 
change its display’s brightness, the brightness 
of the RI Dock’s Power indicator will change as 
well.

• Using Your Amp’s Remote Controller
You can use your amp’s remote controller to 
control basic iPod functions (see page 13).

   * If you use your iPod’s controls to start an iPod slideshow or 

video, these functions will not work, so use the remote con-
troller instead.

Note:
•

Your amp may take several seconds to 
startup, so you might not hear the first 
few seconds of the first song.