Fujitsu 1600 ユーザーズマニュアル

ページ / 48
Features and Controls
1-3
Features and Controls
1
The main features and controls that you use to operate the Point 1600 pen tablet are 
described briefly below. Use of these features and controls is described in detail later 
in this manual. (Features called out in Figure 1-1 and Figure 1-2 which are not listed 
here are also described later in this manual.)
• Suspend/Resume Button
Allows you to suspend or resume system operation or turn the pen tablet on or off 
depending on how your system is configured. 
• Status LEDs
Indicate system power state, battery state, and hard disk drive access. 
• Pen and Pen Holder
The pen is the main input device that you use to enter data and run programs. The 
pen should be stored in the pen holder while not in use. 
• Hotpads
Tap on the hotpads to adjust speaker volume, display contrast and brightness, to 
perform a right-mouse-button click, or select the display device. 
• DC Power Input
Allows you to attach an external power source to power the pen tablet and charge 
the battery pack. 
• Keyboard/Mouse Port
Allows you to connect the Fujitsu keyboard or a PS/2-style mouse. (Most 
PS/2-style keyboards can be connected successfully.) 
• Optional Wireless LAN Adapter or Built-In Modem
Your system may be equipped with an optional wireless LAN adapter, in which 
case the antenna (shown) may be present, or an optional built-in modem, in which 
case an RJ-11 jack (not shown) is present in this location. 
• Battery Pack
The battery pack on the Point 1600 pen tablet can be charged in the pen tablet or 
can be removed from the pen tablet and charged in an external battery charger 
(sold separately). 
• Hard Disk Drive
The Point 1600 pen tablet is equipped with a built-in hard disk drive.