HP (Hewlett-Packard) TX2500 ユーザーズマニュアル
Pen holder and pen eject assembly
Description
Spare part number
Pen holder and pen eject assembly
464113-001
Before removing the pen holder and pen eject assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power cord.
4.
5.
Remove the following components:
a.
Pen (see
)
b.
c.
Memory module compartment cover (see
d.
Optical drive (see
)
e.
Keyboard (see
)
f.
Switch cover (see
g.
Display assembly (see
)
h.
Top cover (see
i.
Power switch assembly (see
j.
System board (see
)
Remove the pen holderand pen eject assembly:
1.
Remove the Phillips PM2.0×3.0 screw (1) that secures the pen eject assembly to the base
enclosure.
enclosure.
2.
Remove the pen eject assembly (2).
3.
Remove the two Phillips PM2.0×3.0 screws (3) that secure the pen holder to the base enclosure.
Component replacement procedures
65