HP (Hewlett-Packard) NQ286UPABA ユーザーズマニュアル
Expansion memory module
Description
Spare part number
Memory modules (PC2-6400, 800-MHz, DDR2)
4-GB
492572-001
2-GB
492571-001
1-GB
492570-001
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
and then unplugging the AC adapter from the computer.
4.
Remove the memory module:
1.
Loosen the Phillips PM2.5×6.0 captive screw (1) that secures the memory module compartment
cover to the computer.
cover to the computer.
2.
Lift the front edge of the cover (2), swing it back, and remove the cover (3). The memory module
compartment cover is included in the Plastics Kit, spare part number 492577-001.
compartment cover is included in the Plastics Kit, spare part number 492577-001.
3.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
module. (The edge of the module opposite the slot rises away from the computer.)
50
Chapter 4 Removal and replacement procedures