HP (Hewlett-Packard) NQ286UPABA ユーザーズマニュアル
LED board
Description
Spare part number
LED board (includes cable and Mylar cover)
499209-001
Before removing the LED board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
and then unplugging the AC adapter from the computer.
4.
5.
Remove the following components:
a.
Primary hard drive (see
)
b.
Optical drive (see
) or secondary hard drive (see
c.
Switch cover and keyboard (see
d.
Display assembly (see
)
e.
Top cover (see
Remove the LED board:
1.
Release the ZIF connector to which the LED board cable is connected and disconnect the LED
board cable (1) from the system board.
board cable (1) from the system board.
2.
Release the LED board cable (2) from the base enclosure. The LED board cable is attached to
the base enclosure with double-sided tape.
the base enclosure with double-sided tape.
82
Chapter 4 Removal and replacement procedures