HP (Hewlett-Packard) N1010v Series ユーザーズマニュアル

ページ / 126
 
Removing the Display Assembly 
(Authorized Service Providers Only) 
Required Equipment 
•  #1 Phillips screwdriver. 
Removal Procedure 
1. 
2. 
3. 
4. 
5. 
6. 
7. 
Unplug the AC adapter, if present, and remove the battery. 
Remove the two retaining screws from the rear of the notebook. 
Remove the screws from the left and right antenna PCAs. Relocate the antenna PCAs away from 
the display assembly hinges. 
Disconnect the display assembly cable from the motherboard. 
Remove the six retaining screws that secure the display assembly to the top case. Note that there is 
a grounding strap at the left hinge. 
Lift the display assembly off of the notebook. 
Service Manual 
Removal and Replacement 
2-17