HP (Hewlett-Packard) nc6300 ユーザーズマニュアル
1–4
Maintenance and Service Guide
Product Description
❏
External monitor
❏
RJ-11 (modem)
❏
RJ-45 (network)
❏
IEEE 1394
❏
Accessory battery
❏
Digital Media Slot (select computer models only)
❏
S-Video-out (select computer models only)
❏
Docking connector (select computer models only)
1.2 Resetting the Computer
If the computer you are servicing has an unknown password,
follow the steps below to reset the password. These steps also
clear CMOS.
follow the steps below to reset the password. These steps also
clear CMOS.
✎
The following steps will not clear an unknown password if the
stringent security option has been enabled in the BIOS. If
stringent security is enabled, the system board must be replaced
to reset an unknown password. Refer to
stringent security option has been enabled in the BIOS. If
stringent security is enabled, the system board must be replaced
to reset an unknown password. Refer to
Before replacing the system board, perform the steps below to
make sure stringent security has been properly enabled.
make sure stringent security has been properly enabled.
Enabling stringent security provides enhanced protection for the
power-on password and administrator password and other forms
of power-on authorization. Stringent security is enabled/disabled
by accessing the Password Options menu in the Computer Setup
utility. Refer to
power-on password and administrator password and other forms
of power-on authorization. Stringent security is enabled/disabled
by accessing the Password Options menu in the Computer Setup
utility. Refer to
for more
information.
for more
information).Remove the real-time clock (RTC) battery (refer
to
to
removing and replacing the RTC battery).