HP (Hewlett-Packard) E1Y35UT#ABA ユーザーズマニュアル
Fingerprint reader board
Description
Spare part number
Fingerprint reader board (includes cable)
702845-001
Before removing the fingerprint reader board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
), and then remove the following components:
a.
b.
)
c.
Service cover (see
d.
Keyboard (see
)
e.
Base enclosure (see
f.
)
g.
System board (see
)
Remove the fingerprint reader board:
1.
Position the system board upside down.
2.
Disconnect the fingerprint reader board cable from the system board connector, and then
remove the assembly.
remove the assembly.
3.
Remove the fingerprint reader board and cable.
Reverse this procedure to install the fingerprint reader board.
Component replacement procedures
75