HP (Hewlett-Packard) E0W59UARABA ユーザーズマニュアル

TouchPad board (includes cable)

732278-001

Before removing the TouchPad board, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

Disconnect the tablet from the keyboard dock (see 

Remove the base enclosure (see 

Remove the battery (see 

Remove the hinge assembly (see 

Remove the TouchPad board and cable:

Remove the two Phillips broadhead PM2.0×2.0 screws (1) that secure the touchpad board to the dock.

From the inside of the dock, push downward on the board to disengage it from the dock, and then

remove it from the dock (2).

Reverse this procedure to install the TouchPad board.

42

Chapter 5   Removal and replacement procedures for Authorized Service Provider parts