HP (Hewlett-Packard) D3K33UT#ABA ユーザーズマニュアル
2.
Lift the touchpad from the computer (2).
3.
Remove the touchpad.
Reverse this procedure to install the touchpad.
NOTE:
When replacing the touchpad, make sure to install the screws into holes closer to the edge of
computer.
Power connector
Description
Spare part number
Power connector
702875-001
Before removing the power connector, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
), and then remove the following components:
a. Hard drive cover (see
c.
Service cover (see
)
66
Chapter 4 Removal and replacement procedures