HP (Hewlett-Packard) EX691UA-NOOS ユーザーズマニュアル
Default power settings
This section explains the default standby, hibernation, and shutdown procedures. For information
about changing the function of the power features on the computer, refer to "
about changing the function of the power features on the computer, refer to "
The controls and lights discussed in this section are illustrated in "
Turning the computer or display on or off
Task
Procedure
Result
Turn on the computer.
Press the power button.
●
The power lights are turned on.
●
The operating system loads.
Shut down the computer.*
1.
Save your work and close all open
applications.
applications.
2.
Shut down the computer through the
operating system by selecting Start >
Turn Off Computer > Turn Off.
operating system by selecting Start >
Turn Off Computer > Turn Off.
NOTE
If the system is
unresponsive and you are unable
to shut down the computer with
these procedures, refer to "
to shut down the computer with
these procedures, refer to "
."
●
The power lights are turned off.
●
The operating system shuts
down.
down.
●
The computer is turned off.
Turn off the display while
the power is on.
the power is on.
Close the computer.
Closing the computer activates the
display switch, which initiates standby.
display switch, which initiates standby.
Using emergency shutdown procedures
CAUTION
Emergency shutdown procedures result in the loss of unsaved information.
If the computer is unresponsive and you are unable to use normal Windows shutdown procedures,
try the following emergency procedures in the sequence provided:
try the following emergency procedures in the sequence provided:
●
Press
ctrl+alt+delete
. Then, select Shut Down > Turn Off.
●
Press and hold the power button for at least 5 seconds.
●
Disconnect the computer from external power and remove the battery pack.
36
Chapter 3 Power
ENWW