HP (Hewlett-Packard) D8C07UTABA ユーザーズマニュアル

Reverse this procedure to install the base enclosure.

Speaker assembly (includes cable)

641840-001

Before removing the speaker assembly, follow these steps:

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

Disconnect the power from the computer by unplugging the power cord from the computer.

Disconnect all external devices from the computer.

Remove the battery (see 

), and then remove the following components:

Service cover (see 

)

Smart Card reader (see 

Optical drive (see 

)

Hard drive (see 

)

Keyboard (see 

Base enclosure (see 

)

Remove the speaker assembly:

Turn the base enclosure right-side up, with the front toward you.

Component replacement procedures

83